SOVERSHENSTVOVANIE TECHNOLOGY IZGOTOVLENIYA CORPORATION PLUNJERNOGO PUMP

Authors

  • Valieva D. Sh. Assistant Teacher of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University
  • Tursunov N. Q. Ph.D., Head of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Erkinov S. M. Assistant of Tashkent State Technical University named after Islam Karimov
  • Kuchkorov L. A. Ph.D. student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan

DOI:

https://doi.org/10.17605/OSF.IO/FA4Y6

Keywords:

material consumption, technological process, basing

Abstract

The technological process and the manufacture of a plunger pump housing have been developed and described in this article. The choice of the type and methods of obtaining the workpiece is shown in the article, along with the methods for achieving the required accuracy of the pressure automaton, technological bases, optimal allowances that ensure the minimum material consumption are selected. Operations were normalized, a fixture  that ensures the accuracy of manufacturing the part was selected. The calculation of the technological cost of the body of the automatic pressure was carried out.

Downloads

Published

2022-05-31

How to Cite

Valieva D. Sh., Tursunov N. Q., Erkinov S. M., & Kuchkorov L. A. (2022). SOVERSHENSTVOVANIE TECHNOLOGY IZGOTOVLENIYA CORPORATION PLUNJERNOGO PUMP. Web of Scientist: International Scientific Research Journal, 3(5), 1740–1747. https://doi.org/10.17605/OSF.IO/FA4Y6

Issue

Vol. 3 No. 5 (2022): wos

Section

Articles

Most read articles by the same author(s)