DEVELOPMENT OF A METHOD FOR SELECTING THE COMPOSITIONS OF MOLDING SANDS FOR CRITICAL PARTS OF THE ROLLING STOCK

Authors

  • Kuchkorov Lochinbek Akhmadjon ugli Ph.D. student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Tursunov Nodirjon Kayumjonovich Ph.D., head of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Valieva Dilmira Shavkat qizi Assistant teacher of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University
  • Toirov Otabek Toir ugli Ph.D. student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Erkinov Sultonbek Muzaffar ugli Assistant of Tashkent State Technical University named after Islam Karimov Tashkent, The Republic of Uzbekistan

DOI:

https://doi.org/10.17605/OSF.IO/DHR5X

Keywords:

Core and molding sands, knockout, gas permeability

Abstract

Studies have been carried out on the choice of compositions of molding sands for especially critical parts of the rolling stock. Quantitative statistical dependences in the formulation of mixtures have been obtained. dependences of gas permeability, work, cost for destruction and rigidity of the sample on the magnitude of various loads.

Downloads

Published

2022-05-31

How to Cite

Kuchkorov Lochinbek Akhmadjon ugli, Tursunov Nodirjon Kayumjonovich, Valieva Dilmira Shavkat qizi, Toirov Otabek Toir ugli, & Erkinov Sultonbek Muzaffar ugli. (2022). DEVELOPMENT OF A METHOD FOR SELECTING THE COMPOSITIONS OF MOLDING SANDS FOR CRITICAL PARTS OF THE ROLLING STOCK. Web of Scientist: International Scientific Research Journal, 3(5), 1840–1847. https://doi.org/10.17605/OSF.IO/DHR5X

Issue

Vol. 3 No. 5 (2022): wos

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>