THE PROBLEM OF METAL REFINING AND TECHNICAL SOLUTIONS FOR THE FORMATION OF ACTIVE SLAG IN INDUCTION FURNACES

Authors

  • Tursunov Nodirjon Kayumjonovich Ph.D., head of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Toirov Otabek Toir ugli Ph.D. student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Erkinov Sultonbek Muzaffar ugli Assistant of Tashkent State Technical University named after Islam Karimov Tashkent, The Republic of Uzbekistan
  • Kuchkorov Lochinbek Akhmadjon ugli Ph.D. student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan

Keywords:

Induction crucible furnace, slag, desulfurization

Abstract

In the foundry industry, induction crucible furnaces (ITF) are widely used, which are very effective for the production of various steel grades. Their features make it possible to obtain the required chemical composition of steel with minimal loss of alloying materials. However, the limited possibilities for refining from harmful impurities dictate certain requirements for the charge, which affects the cost of the final product.

Downloads

Published

2022-05-31

How to Cite

Tursunov Nodirjon Kayumjonovich, Toirov Otabek Toir ugli, Erkinov Sultonbek Muzaffar ugli, & Kuchkorov Lochinbek Akhmadjon ugli. (2022). THE PROBLEM OF METAL REFINING AND TECHNICAL SOLUTIONS FOR THE FORMATION OF ACTIVE SLAG IN INDUCTION FURNACES. Web of Scientist: International Scientific Research Journal, 3(5), 1996–2001. Retrieved from https://wos.academiascience.org/index.php/wos/article/view/1805

Issue

Vol. 3 No. 5 (2022): wos

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>