CHANGE IN THE MICROSTRUCTURE OF HADFIELD STEEL AFTER HEAT TREATMENT

Authors

  • Toirov Otabek Toir ugli Ph.D. Student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Tursunov Nodirjon Kayumjonovich Ph.D., Head of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Urazbaev Talgat Tileubaevich Senior Lecturer, of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Kenjayev Sirojiddin Nematullayevich Senior Lecturer, of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan

DOI:

https://doi.org/10.17605/OSF.IO/8ZRMX

Keywords:

Hadfield steel, melting technology, TESCAN VEGA 3 microscope

Abstract

The article describes the technology of melting Hadfield steel with such temperature conditions at which the quality of the casting increases. The structure of the steel was studied using a scanning electron microscope.

Downloads

Published

2022-06-08

How to Cite

Toirov Otabek Toir ugli, Tursunov Nodirjon Kayumjonovich, Urazbaev Talgat Tileubaevich, & Kenjayev Sirojiddin Nematullayevich. (2022). CHANGE IN THE MICROSTRUCTURE OF HADFIELD STEEL AFTER HEAT TREATMENT. Web of Scientist: International Scientific Research Journal, 3(6), 141–146. https://doi.org/10.17605/OSF.IO/8ZRMX

Issue

Vol. 3 No. 6 (2022): wos

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3