THEORETICAL BASIS OF THE BEHAVIOR OF THE COTTON-COTTON MODEL IN THE SEPARATOR PIPE

Authors

  • Shodiyev Ziyodullo Ochilovich Candidate of Technical Sciences, Head of the Department of General Professional Disciplines, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Bukhara Branch.
  • Umirzakov Jurabek Umirzak Assistant, Tashkent Institute of Irrigation and Agriculture Mechanisation Engineers, Bukhara Branch.

DOI:

https://doi.org/10.17605/OSF.IO/STMEX

Keywords:

model, material, elastic

Abstract

Usually, cotton pieces in the pipe are affected by the force of air absorption, the force of friction on the walls of the pipe and the force of gravity. If the slotted cotton is absorbed by air with a speed of only 0x µ0, which is in the pipe, then the forces Fj,1 and Fj, 2 are considered the Resistance Forces of the air, and their value is found in accordance with the accepted law. Here it is recommended that this law be taken in two ways. Air resistance is proportional to its speed, then it is possible to write the following equations (S1, S2 - resistance coefficients).

Downloads

Published

2022-02-21

How to Cite

Shodiyev Ziyodullo Ochilovich, & Umirzakov Jurabek Umirzak. (2022). THEORETICAL BASIS OF THE BEHAVIOR OF THE COTTON-COTTON MODEL IN THE SEPARATOR PIPE. Web of Scientist: International Scientific Research Journal, 3(02), 597–603. https://doi.org/10.17605/OSF.IO/STMEX

Issue

Section

Articles