STUDYING THE INFLUENCE OF THE HEATING TEMPERATURE OF THE DRYING SHELL DRUM FOR THE DRYING PROCESS OF RAW COTTON

Authors

  • Shodiyev Ziyodullo Ochilovich Candidate of Technical Sciences, Head of the Department of General Professional Disciplines, Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Bukhara Branch
  • Umirzakov Jurabek Umirzak Assistant, Tashkent Institute of Irrigation and Agriculture Mechanisation Engineers, Bukhara Branch

DOI:

https://doi.org/10.17605/OSF.IO/YUD25

Keywords:

pty, dryer, Paytug

Abstract

The test was carried out according to the technological regulations for processing raw cotton (MPKI-30-2012). The mode of operation of the dryer was selected in accordance with the regulations, depending on the initial humidity, the drying was carried out at the heating temperature of the drum shell t = 25-40-55-70 ° C. Before the experiment, the time required to heat the drum shell was determined. The tests were carried out on raw cotton of the breeding variety An-Bayavut 3, III industrial grade with an initial humidity of 10.5 to 22.3%.

Downloads

Published

2022-02-21

How to Cite

Shodiyev Ziyodullo Ochilovich, & Umirzakov Jurabek Umirzak. (2022). STUDYING THE INFLUENCE OF THE HEATING TEMPERATURE OF THE DRYING SHELL DRUM FOR THE DRYING PROCESS OF RAW COTTON. Web of Scientist: International Scientific Research Journal, 3(02), 604–610. https://doi.org/10.17605/OSF.IO/YUD25

Issue

Vol. 3 No. 02 (2022): wos

Section

Articles