SELECTION OF THE MATERIAL OF THE LINING OF INDUCTION FURNACES IN STEEL 20GL

Authors

  • Tursunov Tokhir Muratovich Senior lecturer, of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Tursunov Nodirjon Kayumjonovich Ph.D., head of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Alimukhamedov Shavkat Pirmukhamedovich Dr. tech. sciences, professor of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Urazbaev Talgat Teleubaevich Senior lecturer, of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Toirov Otabek Toir ugli Ph.D. student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan

DOI:

https://doi.org/10.17605/OSF.IO/2V4KT

Keywords:

ICF lining, crucible service life, lining requirements

Abstract

This article is devoted to the study of the working conditions of the lining of the crucible of the induction crucible furnace in order to increase the service life of the lining and increase the number of melts, which will lead to a more stable operation of the furnace itself and an increase in the productivity of the furnace metal.

Downloads

Published

2022-05-31

How to Cite

Tursunov Tokhir Muratovich, Tursunov Nodirjon Kayumjonovich, Alimukhamedov Shavkat Pirmukhamedovich, Urazbaev Talgat Teleubaevich, & Toirov Otabek Toir ugli. (2022). SELECTION OF THE MATERIAL OF THE LINING OF INDUCTION FURNACES IN STEEL 20GL. Web of Scientist: International Scientific Research Journal, 3(5), 1728–1739. https://doi.org/10.17605/OSF.IO/2V4KT

Issue

Vol. 3 No. 5 (2022): wos

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>