DEVELOPMENT OF THE TECHNOLOGY OF STEEL MODIFICATION FOR THE MANUFACTURE OF LARGE, PARTICULARLY RESPONSIBLE CAST PARTS

Authors

  • Tursunov Nodirjon Kayumjonovich Ph.D., Head of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Toirov Otabek Toir ugli Ph.D. Student of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Alimukhamedov Shavkat Pirmukhamedovich Dr. Tech. Sciences, Professor of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan
  • Azimov Sadriddin Joraqulovich Senior Lecturer of the Department of Materials Science and Mechanical Engineering, State Transport University, Tashkent, The Republic of Uzbekistan
  • Kenjayev Sirojiddin Nematullayevich Senior Lecturer, of the Department of Materials Science and Mechanical Engineering, Tashkent State Transport University, Tashkent, The Republic of Uzbekistan

DOI:

https://doi.org/10.17605/OSF.IO/EYU25

Keywords:

metal refining, steel modification, flux-cored wire

Abstract

A study was carried out on the refining and modification of steel in a steel-pouring ladle using flux-cored wire grade PP-TM14-FeVAlCa. Steel grade 20GL was used as the test metal. The results of various variants of refining, both traditional and steel processing by combining the operations of deoxidation and desulfurization with flux-cored wire, are presented. The paper presents the results of a study of the mechanical properties of steel grade 20GL for various processing options.

Downloads

Published

2022-06-20

How to Cite

Tursunov Nodirjon Kayumjonovich, Toirov Otabek Toir ugli, Alimukhamedov Shavkat Pirmukhamedovich, Azimov Sadriddin Joraqulovich, & Kenjayev Sirojiddin Nematullayevich. (2022). DEVELOPMENT OF THE TECHNOLOGY OF STEEL MODIFICATION FOR THE MANUFACTURE OF LARGE, PARTICULARLY RESPONSIBLE CAST PARTS. Web of Scientist: International Scientific Research Journal, 3(6), 1001–1007. https://doi.org/10.17605/OSF.IO/EYU25

Issue

Vol. 3 No. 6 (2022): wos

Section

Articles

Most read articles by the same author(s)

<< < 1 2 3 > >>